Life Safety
The NHL-BE2 Compact thermoplastic exit sign is new and improved. Featuring Red and Green field selectability, and included double face so no need to worry about ordering more than one style. The NHL-BE2 can replace four different skus by itself. EZ snap mounting canopy included for top or end mount, and a universal knockout pattern on the back plate is included for wall mount. Made in USA optional available for BAA.
The new and improved BERC2 is a low profile remote capable combination exit and emergency light. Smaller and less intrusive than the previous generation, but just as bright and with a modern appearance. The BERC2 comes standard with a bi-color LED indicator light to alert the end user of the battery condition and features a unique all-inclusive lamp, reflector, and lens assembly, allowing for great efficiency.
The EUL2 is a ultra bright, energy efficient emergency light. Designed for maximum light output, you can achieve 100ft center to center spacing at 7 1/2ft mounting height, giving you a 3ft path of egress. With this advantage, you ca use less fixtures than your traditional emergency lighting systems and save on installation costs while still meeting local codes and providing safe emergency lighting. Available with optional Self Diagnostic Testing and comes standard in 120-277 universal voltage and remote capacity of 3 watts.
The NHL-LPSHW Series is designed to provide 750 to 1150 watts of emergency power to Incandescent, Fluorescent, Induction and/or LED fixtures. The NHL-LPSHW unit provides clean, sinusoidal A C output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s). Unlike a ballast fluorescent emergency pack, the NHL-LPSHW provided power to the input side of the fixture (including the fixture ballast) eliminating any chance of incompatibility. The NHL-LPSHW Series is designed for surface mounting. All NHLLPSHW systems will provided emergency power output for a minimum of 90 minutes.
The NHL-LPSHW Midsize-electrical inverter systems for powering up to 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads.
NHL-MR16X
LED NEMA4X/NSF EMERGENCY UNIT INDEMR16
- Two fully adjustable, ultra bright 3.3 watt high performance MR-16 base LED lamp heads for optimized center-to-center spacing.
- Dual 120/277 voltage.
- Unique bi-color LED indicator light alerts occupant on battery condition (Green-normal, Red-check-battery).
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 6V/12V maintenance-free, rechargeable NiCd battery (15W models).
- 6V/12V maintenance-free, rechargeable sealed lead acid battery (36W and 54W models).
- Offers 7.8W, 28.8W, 46.8W of remote capacity (6V/12V DC output) standard on the 15W, 36W and 54W models.
- Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.
- Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Universal knockout pattern on back provided with gasket for watertight seal for back mount.
- Suitable for wall mount.
- Ultra bright, energy efficient, long life Red or Green LEDs.
- Dual 120/277 voltage.
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 4.8V long life, maintenance-free, rechargeable NiCd battery (EM models only).
- Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination
- Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Mounting hardware provided for back surface wall mount.
- 5VA flame retardant, UV-stabilized polycarbonate in white or black finish.
- High-impact resistant, UV-stabilized polycarbonate clear lens.
- Corrosion-resistant enclosure with engineering grade silicone gasket.
- Knockouts provided for conduit feed applications.
- EZ snap-out Chevron directional indicators.
- NEMA4X and NSF rated.
-
UL certified for use in food service operations.
- UL listed for Wet Locations.
- Certified to CEC under Title 20 Regulations.
The WLEC is the complimentary combo version of our WLE. Full LED illumination in a watertight housing perfect for food processing facilities, hose down areas, commercial kitchens, exposed outdoor pavilions, etc.
The DLEM is a 6” recessed Emergency light with an adjustable ultra bright 8 watt bi-pin halogen lamp in a gimbal trim. Featuring a sealed beam PAR36-type gimbal trim with smooth chrome-plated metalized reflector and plastic lens offers optimal light distribution. Available in dual 120/277 voltage, and comes standard with LVD (low voltage disconnect) prevents battery from deep discharge. Compatible with drop ceiling mount installations. Bar hangers included.
