Products
The DCE series is perfect for area where you need something a little more than the standard thermoplastic exit. Constructed with a Die Cast Aluminum Housing, the DCE is available with six or eight inch letters and optional Self Diagnostic Testing.
The DCC is the exit/emergency combo compilation of our Die Cast Aluminum exits. The DCE provides everything needed in a traditional combo unit, but with a stronger Die Cast Aluminum housing.
The DCLP is the low profile version of our Popular DCE. Constructed with a Diecast Aluminum Housing, but in a low profile package, this exit is perfect for areas where you need to make every inch count!
The NHL-LPSHW Series is designed to provide 750 to 1150 watts of emergency power to Incandescent, Fluorescent, Induction and/or LED fixtures. The NHL-LPSHW unit provides clean, sinusoidal A C output power allowing it to be remotely mounted up to 1,000 feet away from the controlled fixture(s). Unlike a ballast fluorescent emergency pack, the NHL-LPSHW provided power to the input side of the fixture (including the fixture ballast) eliminating any chance of incompatibility. The NHL-LPSHW Series is designed for surface mounting. All NHLLPSHW systems will provided emergency power output for a minimum of 90 minutes.
The NHL-LPSHW Midsize-electrical inverter systems for powering up to 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads.
Mini-electrical inverter systems for powering up to 220 Watts/250VA of incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated (PWM) output design provides clean, 60 Hz. sinusoidal emergency power to loads. Models are available for surface, recessed or T-Grid mounting as required.
The ESED is our economical version of our Surface Mount Edgelit. Built with an all plastic housing, this exit sign is price right and performs well. The ESED is a good alternative where sticking to budget is crucial, but you need something a little more attractive than a standard exit sign.
New Horizon Lighting proudly offers our filed installable LED emergency battery packs available in five different outputs to fulfill your emergency lighting needs! These constant current LED Emergency battery packs are easy to install and will provide a minimum of 90 minutes of emergency illumination. UL listed for damp locations and filed installation.
The BCL is our standard LED Exit/Emergency Combo. This unit is designed to give you that familiar feel of the old incandescent combos, but now in energy efficient LED. The BCL is a good choice for just about any commercial space.
MPS Series inverter systems are designed to provide sinusoidal AC emergency power to connected incandescent, fluorescent or LED fixtures of between 20 and 55 watts. Surface, recessed or ceiling T-Grid mount models are designed for easy installation either on or near controlled fixtures. MPS models support Normally-ON, Normally-OFF, switched operation or any combination thereof (see wiring diagram).
NHL-MR16X
LED NEMA4X/NSF EMERGENCY UNIT INDEMR16
- Two fully adjustable, ultra bright 3.3 watt high performance MR-16 base LED lamp heads for optimized center-to-center spacing.
- Dual 120/277 voltage.
- Unique bi-color LED indicator light alerts occupant on battery condition (Green-normal, Red-check-battery).
- Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
- 6V/12V maintenance-free, rechargeable NiCd battery (15W models).
- 6V/12V maintenance-free, rechargeable sealed lead acid battery (36W and 54W models).
- Offers 7.8W, 28.8W, 46.8W of remote capacity (6V/12V DC output) standard on the 15W, 36W and 54W models.
- Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.
- Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
- Universal knockout pattern on back provided with gasket for watertight seal for back mount.
- Suitable for wall mount.
The NHL-BE2 Compact thermoplastic exit sign is new and improved. Featuring Red and Green field selectability, and included double face so no need to worry about ordering more than one style. The NHL-BE2 can replace four different skus by itself. EZ snap mounting canopy included for top or end mount, and a universal knockout pattern on the back plate is included for wall mount. Made in USA optional available for BAA.